Wastewater treatment

Biological methods as well as the use of a variety of chemical agents

represent the current state of the art in both community and industrial

wastewater treatment.

lacquer waste water, micro flakesChemicals such as splitters, coagulants and adsorbents are often used

in wastewater treatment. In the first step, micro flocs are produced by

means of coagulation with POLY SEPAR® CFL. In the second step, the

micro flocs are enlarged according to the dewatering aggregate by using

coagulants, which are mostly in ready to use solutions. As an

alternative to this, adsorbents tailored to each application case can

also be used during batch treatment.

Many different products can be used to pre-treat wastewater at the

source, i.e. before it is discharged into public sewage systems:

defoamer, swimming mud, thickening, drainage

  • Coagulation aids: for conditioning prior to sludge thickening and dewatering
  • Emulsion-breaking agents (to remove emulsified oils and fats)
  • Adsorbents (to bind small amounts of residual oils or other light contaminants, e.g. dyestuffs)
  • Charcoal and bentonite: for  CSB-reduction
  • Defoaming agents: scum prevention and removal
  • Vacuum aspirator: Degassing of media
  • Heavy metal precipitants: especially for elimination of nickel and copper
  • Crystallization inhibitors: to prevent and remove pipeline deposits (MAP or calcium compounds)

We will be glad to provide consulting services on the required systems technology. Here, you can access our field service.